N Lead-free wave soldering
Series
1. Selective sprayer ( optional )
2. Compatible with customer MES system
3. The spray is far distant from preheating zone.preventing fire hazard
4. Preheating heat pipe is U-typed and its material high temperature resistant stainless steel sintered tube, with a servicelife of more than 12 years
5. modular design of preheating system and insulation measures are good6、1/2HP high power wave motor, maximum peak height up to 16mm.(optional for above 20MM)
6. 1KG/10HLow amount of machine tin dross
N Comparison table of technical parameters of EIP wave soldering series
|
Dimension (LxWxH) |
4550x1605x1715mm |
4550x1886x1715mm |
4550x1865x1715mm |
|
PCB transport direction |
L--->R (R --->L Optional) |
||
| Main voltage |
3P5W380VAC, 50/60HZ 110A |
3P5W380VAC, 50/60HZ 110A |
3P5W380VAC, 50/60HZ 115A |
| Power supply requirements |
50KW |
||
| Air power requirements |
0.3- 0.7MPa |
||
| Total power |
40KW |
40KW |
40KW |
| Normal power consumption |
10KW |
10KW |
10KW |
| Control method |
PC+PLC |
||
| Preheating method |
Hot air / infrared / spotlight optional |
||
| Preheating fan speed control mode |
Promise frequency control |
||
| Number of preheating zones |
3 |
||
| Pre-heat zone length |
1740mm |
||
| Pre-heat temperature |
Room temperature - 280°C |
||
| Pre-heat temperature control |
PID+SSR mode |
||
| wave running mode |
Mechanical pump |
||
| Tin furnace heat pipe power |
1.0KW*12 |
||
| Tin furnace capacity itin specific gravity 7.5 |
650KG |
750KG |
800KG |
| Tin furnace limit withstand temperature |
MAX: 300°C |
||
| Tin furnace limit the use of temperature |
MAX: 280'C |
||
| Tin furnace control mode |
PID+SSRmode |
||
| Peak drive power |
1/2HPx23P 220VAC |
1/2HP+1HP 3P 220VAC |
1/2HPx1 1HPx1 3P 220VAC |
| Crest height adjustmant method |
Frequency conversion regulation |
||
| Tin furnace heating time |
150MIN Set temperature |
180MIN Set temperature |
|
| PCB transfer speed |
0- 1800mm / min |
||
| PCB board width range |
80-350mm |
80-510mm |
80-610mm |
| PCB board height |
Top: 110mm Bottom: 25mm |
||
| PCB inlet transport height |
750±20mm |
||
| Transport guide inclination |
40 70 Range adjustment |
4°-7° |
|
| Transport motor power |
90W 3P 220VAC |
||
| Transport motor speed control mode |
Frequency control |
||
| Nitrogen consumption |
15m3/ h100ppm |
||
| Nitrogen gas source pressure |
0.5-0.8MPA |
||
| Nitrogen gas source oxygen content |
10PPM |
||
| Number of nitrogen flow meters |
3 |
||
| Flux flow |
10-100ml/MIN |
||
| Spray pressure |
0.25MP A-0.5MPA |
||
| Exhaust fan |
380VAC 750W |
||
| Suction pipe diameter |
Cll200mm |
||
Messages
Related Products
Contact number
Mailbox： huichun.xiao@zsw-ele.com
Address： No. 8, Huihao Industrial Park, Heshuikou Community, Guangming New District, Shenzhen
URL： http://www.zsw-ele.com
ZSW people adhere to the business philosophy of trustworthiness and ethics, with a persistent enterprising attitude, a rigorous and dedicated work style, a team spirit of concerted efforts, and always insist on ensuring that users are provided with high-end equipment and high-quality services that meet international quality standards and specifications. It has been recognized and favored by many well-known companies at home and abroad!
Copyright © 2021 All rights reserved ZSW 粤ICP备19070058号 Sitemap
Follow Us